Mitsubishi Electric MELDAS 600M Series Instruction Manual page 421

6.5 Precautions related to stroke limit
(1) When the maximum value and minimum value of the stored stroke limit's prohibited range are set
to the same data, note that the following will occur:
(a) When the maximum value and minimum value are set to the same data, if the outside is the
(2) Stored stroke limit IC is validated by changing the axis specification parameter "130027 IB_off".
(3) Make sure that the lower limit value of the stored stroke limit IC setting value is smaller than the
upper limit value.
(4) Movement in the prohibited range is limited to that in the direction that approaches both I and IC.
Downloaded from ManualsNet.com
CHAPTER 3 MAINTENANCE
6. Setting the Stored Stroke Limit
prohibited range, the entire range will be prohibited. If the inside is the prohibited range, the
entire range will be the moveable range.
Moveable range by IC
search engine
Moveable range by I
III – 35
Moveable
:
direction