Control Parameter Screen (Control Param Screen); Turning Control Parameters On/Off; Control Parameter 1 Details; Control Parameter 2 Details - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.10 Control Parameter screen (Control param screen)

The control parameters for NC operation can be turned ON/OFF on this screen.
1. Control
parameters
(1) Display items
1. Control parameters
(2) Menus
param 1
param 2
(Note) The page changeover keys can also be used to change the number.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
These are each item of the control parameters.
Refer to 2.10.2 to 2.10.3 for details on the parameters.
Menu
Setting of the parameters will start.
Setting
valid
This turns ON the parameter currently indicated
ON
by the cursor.
This turns OFF the parameter currently indicated
OFF
by the cursor.
This changes the screen to the system common
Ctrl
control parameter screen.
This changes the screen to the system
Ctrl
independent control parameter screen.
search engine
2. Monitor (Operation) Screens
Details
I – 102
Details
Type Reference
2.10.1 Turning control
A
parameters ON/OFF
2.10.1 Turning control
C
parameters ON/OFF
2.10.1 Turning control
C
parameters ON/OFF
2.10.2 Control
C
parameter 1 details
2.10.3 Control
C
parameter 2 details