Mitsubishi Electric MELDAS 600M Series Instruction Manual page 428

< HDD built into the control section >
Downloaded from ManualsNet.com
Front cover
Open the front cover
to the control section.
HDD installation fitting
HDD
HDD fixing bracket
PCMCIA interface PCB
(HR841)
CAUTION
Incorrect connections may damage the devices, so connect the cables to the specified
connectors.
Do not replace the HDD while the power is ON.
Dispose of the old HDD according to local laws.
search engine
CHAPTER 3 MAINTENANCE
7. Daily Maintenance
Leave 4 pins open
Fixing screw
Pin 1 display mark
Pay attention to the connector direction.
Leave 4 pins open on the left side
and connect the cable.
III – 42
Control section
Damping cushions
F140 cable
PCB section
F140 cable