Mitsubishi Electric MELDAS 600M Series Instruction Manual page 4

Always thoroughly read the specifications issued by the machine manufacturer, this
manual, related manuals and attached documents before installation, operation,
programming, maintenance or inspection to ensure correct use.
Do not use this numerical controller, before understanding the construction safety items
and cautions.
This manual ranks the safety precautions into "DANGER", "WARNING" and "CAUTION".
DANGER
WARNING
CAUTION
Note that even items ranked as "
the situation. Observe the important information described below in any case.
Not applicable in this manual.
Not applicable in this manual.
1. Items related to product and manual
2. Items related to installation and assembly
Downloaded from ManualsNet.com
When the user may be subject to imminent fatalities or major
injuries if handling is mistaken.
When the user may be subject to fatalities or major injuries if
handling is mistaken.
When the user may be subject to injuries or when physical
damage may occur if handling is mistaken.
For items described as "Restrictions" or "Usable State" in this manual, the instruction
manual issued by the machine manufacturer takes precedence over this manual.
tems not described in this manual must be interpreted as "Not Possible".
I
This manual is written on the assumption that all option functions are added. Refer to
the specifications issued by the machine manufacturer before using.
Refer to the manuals issued by the machine manufacturer for each machine tool
explanation.
Some screens and functions may differ or may not be usable depending on the NC
version.
Always ground the signal cable to ensure stable operation of the system. Ground the
NC unit, power distribution panel and machine to a one-point ground to establish the
same potential.
search engine
Precautions for Safety
CAUTION" may lead to major results depending on
DANGER
WARNING
CAUTION