Mitsubishi Electric MELDAS 600M Series Instruction Manual page 151

Notes when transferring tool life data files
1) When tool life data is output from the NC memory, the file information is inserted at the first and
3.3.3 Comparing files (Compare)
This section explains the method of comparing transferred files.
Refer to "3.3.1 Selecting a device, directory and file" for the method of designating a device, directory and
file.
(1) Comparing files
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
last of the file.
First file information : Number of registered tools (P No.) and the maximum number of
Last file information : Finish code
1)
Press the menu
, and select file
Area change
setting column A.
2)
Designate the device,
directory and file name to be
compared.
3)
Press the menu
, and select file
Area change
setting column B.
4)
Designate the other side
device, directory and file
name to be compared.
5)
Press the menu
.
Compare A:B
(Note) Comparison is not possible for blocks having 251 characters or more when files are
compared on the Data Input/Output screen. (An error occurs.)
The size of one block of data should be within 250 characters.
search engine
3. Setup Screens
possible registrations (T No.)
The designated file name appears.
The designated file name appears.
The file comparison starts. The data being compared
appears in the comparison data display column.
A message appears when the comparison is
completed.
If a comparison error occurs, the block with the error is
displayed in the comparison data display column on the
screen.
I – 136