Changing The Counter Display; Setting The Incremental Time - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
Program
Program
Common
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This changes between display area 1 and display area
Area
change
2.
The display area 1 and 2 display details are selected
tree
from these menus.
modal
Run-out
time
Posn
display
variabl
Local
variabl
The counter type displayed when
Counter
1 type
selected is selected from the menu.
The display details and selection method are the same
Counter
as the Position display1 screen and Position display2
2 type
screen.
This can be selected when there are seven or more
display axes in the selected system. The axis to be
Next displayed is changed to the 1st to 6th axis and 7th and
axis
following axes.
(Note) This is used when there are seven axes or
more in one system.
A random variable No. can be selected.
When the variable No. is set and the
Variabl
pressed, the variables appear with that variable No. at
No.
the top.
The cursor moves to the details of that variable No.
A display level can be selected in a valid area.
When the level (0 to 4) to be displayed is set and the
Display
key is pressed, the local variables appear
INPUT
level
from the top of that level.
The cursor appears at the top variable No.
This changes between the absolute and incremental
value setting modes.
Abs/Inc
The "Abs/Inc" on the screen changes from
incremental to absolute, or from absolute to
incremental.
This sets the incremental time.
Time
setting
search engine
2. Monitor (Operation) Screens
Details
Posn display
INPUT
I – 40
Type Reference
1.5.2 Changing
C
the valid area
(3) Display area 1
and 2 details
C
2.1.1 Changing
is
the counter
display
C
C
2.7.1 Setting
key is common
variables
A
2.8.1 Displaying
local variables
2.8.1 Displaying
A
local variables
1.5.3 Changing
the absolute
C value/
incremental
value setting
2.3.2 Setting the
A
incremental time
–