Mitsubishi Electric MELDAS 600M Series Instruction Manual page 64

Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
5)
Input the program No.
(Example)
1001
INPUT
Set the sequence No. and
block No. in N and B
respectively.
The following two methods can be used to designate the file name (program No.).
• Set the file name, and press the
• Press the menu key
key.
INPUT
(Note) If the list contents differ from the actual device and directory, press the
menu.
6) Device: RS-232C
Enter the 1001 file output
enabled state with the
external device.
7)
Press the menu key
.
Search exec
search engine
Each set No. appears in the setting column.
De v ic e HD
Direc to ry /PR OG RAM
O 1001
N
B
key.
INPUT
, move the cursor to the target file name, and press the
From list
The search starts.
When the search is completed, a message indicating
the end of the search appears.
The device and directory after searching and the
search position appear, and the contents of the setting
column on the right side of the screen are cleared.
I – 49
List update