Selecting The Sampling Data; Erasing The Condition Data - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3. Common
setting area
(2) Menus
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The common data for channel 1 and channel 2 is set.
Sample rate : Set the interval for sampling. The sampling rate (multiple
Horiz scale : Set the time for per one horizontal scale with a ms unit.
Stop trigger : Set the trigger conditions for stopping the continuous
Stop level
Delay time
Menu
This changes the setting target area.
The valid area changes in the order of channel 1
setting area → channel 2 setting area → common
Area
change
setting area.
The setting area will change when the tab key is
pressed.
This displays the submenu for the class of data to be
Data
sampled.
type
This erases all of the conditions set in the currently
Clear
selected area.
This changes to the Waveform display screen (Visual
To
V-Anlyz
analyzer screen).
search engine
5. Diagnosis Screens
Details
of 1.77) closest to the input value is displayed.
(Setting range: 0 to 1000, Unit : ms)
When "0" is input, "AUTO" will appear. When "AUTO" is
displayed, the horizontal axis will be calculated
automatically, and the waveform will be displayed to fit on
one screen. (Setting range: 0 to 9999)
waveform sampling. The signals that can be used for the
trigger data are the X and Y PLC signals. When 0 is
input, the display will change to "Nothing", and the
sampling will not be stopped with a trigger.
(Note) This is valid only during continuous waveform
sampling.
: Set whether to stop the sampling at the rising edge or
falling edge of the stop trigger signal.
(0: Falling edge, 1: Rising edge)
: Designate the time to stop the sampling after the trigger
conditions are established. The value (multiple of 1.77)
closest to the input value will be displayed.
(Setting range: 0 to 1000000ms)
Details
I – 282
Type Remarks
1.5.2 Changing
the valid area
C
5.7.2 Selecting
C the sampling
data
5.7.3 Erasing the
C
condition data
5.8 Waveform
C
display screen