Mitsubishi Electric MELDAS 600M Series Instruction Manual page 434

7.3.3 Hard disk drive
(1) Handling the hard disk
(a) Precautions for use
(b) Precautions for storage
(2) Other precautions for use
(a) Backup recommendation
7.3.4 LCD panel
(1) Handling the LCD panel
(a) Precautions for use
(b) Precautions for storage
Downloaded from ManualsNet.com
1. Correctly connect the cable.
2. Do not touch the connector area with the hands or metal.
3. Do not apply excessive force to the connector area.
4. Do not subject the hard disk to dropping or strong impacts.
5. Do not disassemble the hard disk.
1. Do not store the hard disk in locations having a high temperature or humidity.
2. Keep the hard disk away from magnets or objects having a strong magnetic field.
Hard disks have a limited life, and so should be copied when suitable as a precaution as well
as for storing important data.
1. The polarizing plate (display surface) of the LCD panel surface can be easily scratched, so
be careful during handling.
2. Glass is used in the LCD panel. Be careful not to drop the LCD panel or allow it to hit hard
objects, as the glass may chip or break.
3. The polarizing plate may be stained or discolored if drops of water, etc., adhere to it for
long periods, so be sure to wipe off any moisture immediately.
4. Wipe off any dirt, dust, etc., on the polarizing plate using absorbent cotton or other soft
cloth.
5. A CMOS LSI is used in the LCD panel, so be careful of static electricity when handling.
6. Never disassemble the LCD panel. Doing so will damage the panel.
1. Do not store the hard disk in locations having a high temperature or humidity. (Store within
the storage temperature range.)
2. When storing the LCD panel as an individual unit, be sure that other objects do not touch
or hit the polarizing plate (display surface).
3. When storing the LCD panel for extended periods, be sure to store in a dark place away
from exposure to direct sunlight or fluorescent light.
search engine
CHAPTER 3 MAINTENANCE
7. Daily Maintenance
III – 48