Mitsubishi Electric MELDAS 600M Series Instruction Manual page 101

Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
2)
Change the figure's display
position.
Press the , ,
→ →
↑
keys to adjust the position
↓
to the display center.
3)
Press the key.
INPUT
(Note 1) The amount that the center moves when the cursor shifts one space depends on
the current display scale value.
(Note 2) When displaying a solid, cursor position is not the center position of the display. This
is because there is a deviation between the cursor movement amount
(two-dimensional) and the solid movement amount (three-dimensional).
search engine
The displayed graphics are erased, and the cursor (□)
indicating the center of the display moves according to
the key operation.
and
The cursor position (□) becomes the coordinate system
that is the center of the screen.
The drawing resumes from the current position.
E x e c u t i n g t r a c e
I – 86