Changing The Display System; Changing The Display Axis - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.3.3 Changing the display system

The currently displayed data system can be changed by pressing the
Select an area, and press the
Refer to "1.5.6 Changing the display system" for details on each item.

2.3.4 Changing the display axis

If all axis counters cannot be displayed when the counters are displayed in display area 1 or 2, the
Next axis
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
→
$ $
key can be pressed to display the remaining axes.
search engine
key.
I – 45
→
key.
$ $