Table of Contents
Advertisement
3.3 Data Input/Output screen (Input/Output screen)
The Data Input/Output screen is used to carry out NC data input/output between the NC internal memory
and the external input/output devices.
Here, the hard disk built into the NC device is also treated as external devices.
1. Number of
programs
registered and
remainder
2. Number of
memory
characters
and remainder
3. List
(1) Display items
1. Number of programs
registered and
remainder
2. Number of memory
characters and
remainder
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the registration information of machining program of the
selected device.
(Note 1)
Number of programs registered (Prog entry) :
This displays the number of programs previously registered as user
machining programs.
Remainder (Rema) :
This displays the remaining number of programs that can be
registered.
When "Memory" is selected as the device, the total of the number of
programs registered and the remainder is the maximum number of
registrations set in the specifications.
This displays the number of characters of the machining program of the
selected device.
(Note 1)
Number of memory characters (Character) :
This displays the number of characters previously registered as user
machining programs.
Remainder (Rema) :
This displays the remaining number of characters that can be
registered.
The total of the number of memory characters and the remainder is
the maximum number of memory characters set in the specifications.
search engine
3. Setup Screens
Details
I – 124
4. File setting
column A
5. File setting
column B
6. Input data
7. Comparison data
Advertisement
Table of Contents
