Table of Contents
Advertisement
1.5.4 Changing the display axis
When axis counter or axis unit parameters are displayed on a random screen, there may be cases when
all axis information cannot be displayed because many axes are used. In this case, the remaining axis
details can be displayed by using the menu key.
(1) Screen for changing axis display
Counter display axis:
Parameter axis:
(2) Changing the counter display axis
(Changing the counter display axis on the Position display2 screen)
(3) Changing the Parameter screen display axis
(Changing the axis name on the Axis parameter screen)
(4) Notes
1) When all axes can be displayed in a batch, the
2) Depending on the screen, there may be many menus and the
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
Position display1 screen, Position display2 screen, Position display3 screen, Workpiece measure
screen, Rotate measure screen
Axis parameters, Axis specification parameters, Zero point return parameters, Servo parameters,
Spindle specification parameters, Spindle parameters, High accuracy axis parameters
1)
Press the menu Next axis .
Current pos
Wk.[G54.1P96]
X1
X1
0.000
#1
Y1
0.000
#1
Y1
Z1
Z1
0.000
#1
V1
-123456.000
V1
0.000
#1
W1
W1
0.000
#1
0.000 #1 A1
A1
1)
Press the menu Next axis .
111001
Mirror image
111002
Automatic dog type
111003
Manual dog type
111004
Axis removal
111005
No G76/87 shift
If a
mark is displayed on the upper right of the menu, change the menu by pressing the menu
changeover key. (Refer to "1.5.7 Changing the menu".)
RDY:MEM:ALM
Area
Program
change
tree
RDY:MEM :ALM
Next
axis
search engine
The axis counter on the screen changes to the counter
for an axis currently not displayed.
Current pos
0.000
#1
C1
0.000 #1 C1
0.000
#1
0.000
#1
#1
0.000
#1
0.000 #1
The axis name and data on the screen changes to the
axis name and data for an axis currently not displayed.
<X>
<Y>
<Z>
<U>
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Next axis
Program
Posn
Common
Run-out
modal
display
variabl
time
Menu keys
I – 17
Wk.[G54.1P96]
0.000 #1
<A>
<C>
1
0
0
0
0
0
0
0
0
0
menu is not displayed.
menu may be hidden.
Next axis
Local
variabl
When menu changeover key is
pressed on Position display3 screen
Menu changeover
key
Advertisement
Table of Contents
