Table of Contents
Advertisement
3.5.1 Axis Parameter screen (Axis param screen)
The necessary parameters are set for each axis. Parameters with a " " mark added are validated after
restarting.
Number
34 0001 Mirror image In memory and MDI operation, this reverses the sign
34 0002 Automatic
34 0003 Manual dog
34 0004 Axis removal This excludes the control axis from the NC control
34 0005 No G76/87
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
for the next block movement data (incremental
amount).
(Note) During execution of a machining program, turn
the mirror image parameter OFF at the same
coordinate position where the parameter was
turned ON.
When the changeover position changes,
always execute a reference point return and
"G92 G53 X_ Y_ Z_ a_ ;".
The first reference point return is always dog-type, but
dog type
this selects either dog-type or high-speed (memory
type) for the second and subsequent reference point
returns.
This sets the manual reference point return method
type
for the function above.
targets.
It is used for controlling other axes such as the
additional axes (rotation table, etc.) separately from
the machine.
This is set when the axis direction is not shifted.
shift
search engine
3. Setup Screens
Details
I – 152
Setting range (units)
0: Mirror image invalid
1: Mirror image valid
0: High-speed return
1: Dog-type return
0: High-speed return
1: Dog-type return
0: Axis removal invalid
1: Axis removal valid
0: Shift
1: No shift
Advertisement
Table of Contents
