Mitsubishi Electric MELDAS 600M Series Instruction Manual page 453

2.5 Compensation-related (tool offset, coordinate system offset)
operation messages
Erase? (Y/N)
Clear all axes? (Y/N)
Clear all? (Y/N)
Cannot return to origin
Input P number
2.6 Data input/output-related operation messages
OK? (Y/N)
Input the password
Transfer complete
Transferring
Compare complete
Compare execution
Merge complete
Merge execution
Rename complete
Change complete
Changing
Erase complete
Erase ended.
Some file not erased
Can't open file for dev A
Can't open file for dev B
Can't close file for dev A
Can't close file for dev B
Can't read file for dev A
Downloaded from ManualsNet.com
Appendix 2. Operation Messages
Message
• Message to confirm the operation.
[Y] or [INPUT] : Erase the data.
[N]
• Message to confirm the operation.
[Y] or [INPUT] : Clear the data for all axes.
[N]
• Message to confirm the operation.
[Y] or [INPUT] : Clear all data.
[N]
• Operations other than line paste, paste and data input cannot be
undone.
• The coordinate system [Coord G54.1 P] menu was pressed.
• The expansion workpiece coordinate system P No. was input.
Message
• Message to confirm the operation.
[Y] or [INPUT] : Execute the operation
[N]
• A password must be input before the operation is executed.
• The data transfer completed correctly.
• The data is being transferred correctly.
• The data comparison completed correctly.
• The data comparison is being executed correctly.
• The data merge completed correctly.
• The data merge is being executed correctly.
• The rename has been completed.
• The data conversion completed correctly.
• The data is being converted.
• The data erasing completed correctly.
• The file erasing completed, but there are some files that could not be
erased.
• Could not find the file for device A.
Or, the file is in a state in which it cannot be accessed.
• Could not find the file for device B.
Or, the file is in a state in which it cannot be accessed.
→ Contact the nearest service center.
→ Contact the nearest service center.
• Could not read in the file for device A.
→ Recheck the connection status for device A or the input/output
parameter setting.
search engine
CHAPTER 4 APPENDICES
: Do not erase the data.
: Do not clear the data.
: Do not clear the data.
: Do not execute the operation.
IV – 11
Details
Details