6.1 Maintenance screen
This section explains the screen used for servicing and setting up the NC.
The following screen appears when the
Operations such as NC memory formatting, absolute position parameter setting and SRAM backup can
be carried out at the Maintenance screen.
1. PLC stop state
2. Explanation
of menu
operations
(1) Display items
1. PLC stop state
2. Explanation of menu
operations
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The PLC state (stopped/stop canceled) is displayed.
Stopped
Stop canceled : "STOP" is not highlighted.
A brief explanation of the menu operations is displayed.
search engine
6. Maintenance Screens
menu is pressed.
Mainte
Details
: "STOP" is highlighted.
I – 309