Mitsubishi Electric MELDAS 600M Series Instruction Manual page 246

(1) Display items
Display items
1. Left area
2. Right area
3. Program
display area
O 1234 •••
Top line No.
Editing area
and Line No.
4. List display
area
Prog entry
and Rema
Character
and Rema
<Program>
<Char>
<Comment>
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
The left and right areas are used as the work areas.
The area to be used is selected with the menu key
The area that is not selected is used for displaying the list, etc.
In the screen on the previous page, editing is carried out in the left area, and the
list is displayed in the right area.
This area is used to edit the program (machining program, MDI program, Fixed
cycle program).
When editing machining program :
Select menu
When editing MDI program :
Select menu MDI .
The number does not need to be designated and searched to edit.
Fixed cycle program :
After setting the machine parameter's basic common parameter "Fix_P" to 1,
select
Open
This displays the No. and comment of the program currently being edited.
"MDI" is displayed when editing "MDI" data.
This displays the No. of the head line of the program to be displayed.
The contents of the program being edited are displayed in the editing area.
Numbers are assigned to each line of the program, and the last two digits of that
number are displayed. If the line is long and line is fed, a line No. will not be
assigned at the head of the next line.
When the menu key
programs will appear in the area that is not selected.
Prog entry :
This displays the number of registered programs.
Rema :
This displays the remaining number of programs that can be registered.
Character :
This displays the number of characters in the registered programs.
Rema :
This displays the remaining number of characters that can be registered.
Program : This displays the No. of the machining programs already registered.
The program Nos. are displayed in order from the smallest number,
from 1 to 99999999.
Character : This displays the number of characters registered in correspondence
to the machining program No.
Comment : The area in parentheses ( ) on the top line of the machining program
is the comment. Up to 18 alphanumeric characters and symbols can
be used.
search engine
4. Edit Screens
Details
or , and designate the No.
Open Newly create
, and designate the No.
is pressed, a list of the currently registered machining
List
I – 231
.
Area change