Mitsubishi Electric MELDAS 600M Series Instruction Manual page 161

(1) Menu
Process
Operate
Ethernet
BaseCom
BaseSys
Er Comp
Er Comp
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This copies the parameter setting values in the
Area
designated range.
copy
The range is designated with numbers.
This pastes the range of parameters designated in
area copy. They are pasted in a parameter
corresponding to the axis or system where the cursor
Area
paste
is at.
Once copied, a parameter can be pasted any number
of times until a new parameter is copied.
This can be selected when there are six or more
display axes in the selected system.
The axis to be displayed is changed to the 1st to 5th
axis and 6th to 8th axis.
Next
axis
(This is used when there are six to eight axes in one
system.)
This is used in the screen for the parameters having
an array structure for each system, axis, device, etc.
This changes the screen to the user parameter
Axis
param
screen.
param
param
I/O
param
param
Link
param
This changes the screen to the Machine parameter
param
screen.
(Note) Normally, the machine parameters can be
referred to, but cannot be set.
param
Analog
I/O
Axis
spec
Zp-rtn
param
Servo
param
param
data
search engine
3. Setup Screens
Details
I – 146
Type Reference
3.4.2 Copying/
A pasting
parameters
B
1.5.4 Changing
the display axis
C
3.5 User
parameter details
C
–
C