Table of Contents
Advertisement
2.2 Position Display 2 screen (Position display2 screen)
Various information regarding automatic operation is displayed on this screen.
Buffer revisions and manual value commands (S, M, T, B) are made on this screen.
1. Currently executed
machining program
2. Buffer display
3. Load meter
display area
(1) Display items
1. Currently executed
machining program
Main O 10···
Sub
2. Buffer display
3. Load meter display
area
4. Counter 1 display
Counter 2 display
5. S, M, T, B
commands
6. Ladder usage range
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
Display item
This displays the program No., sequence No. and block No. currently
being executed.
O 1234···
When executing a subprogram, the subprogram program No., sequence
No. and block No. are displayed.
This displays the contents of the machining program currently being
executed.
The block being executed is highlighted.
While revising the buffer, the work area for revisions appears.
Refer to "2.2.3 Correcting the buffer" for details on revising the buffer.
Using the user PLC, the spindle load and Z axis load, etc., is displayed as
bar graphs.
(If not created with the user PLC, this does not appear on the screen.)
This function differs depending on the machine manufacturer.
This displays the counter of the current position and workpiece
coordinates positions, etc.
The type of counter displayed can be selected with the menu key.
This displays the S (spindle speed command value), M (miscellaneous
function command value), T (tool command value) and B (2nd
miscellaneous function command value).
Refer to "1.5.1 Setting a manual value command" for details on the
manual value command setting method.
Up to four S and M commands can be displayed.
(The name of this display area differs according to the output from the
ladder.)
search engine
Details
I – 33
4. Counter 1 display
Counter 2 display
5. S, M, T, B
commands
6. Ladder usage
range
Advertisement
Table of Contents
