Mitsubishi Electric MELDAS 600M Series Instruction Manual page 304

(4) Setting the NC file
The NC file is set with the following procedure.
As an example, the following data will be registered.
File No. = 101, Subprogram ID = 1, Item No. = 1, Data No. = 2
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Setting format
File No./Sub program ID/Item No./Data No.
1)
Move the cursor to the "Data"
position, and press the menu
key NC file .
2)
Set the file No., subprogram
ID, item No. and data No.
using a slash "/" as the
identifier.
101/1/1/2 INPUT
(Note) Only the data handled as the Long type can be set.
search engine
5. Diagnosis Screens
The details set in "Data" will appear.
Ch2
Data
V-scale/div
Base line
Offset
Samp valid
I – 289
Setting example
101/1/1/2
101/1/1/2/NC file
10000
0
0
0