Mitsubishi Electric MELDAS 600M Series Instruction Manual page 197

(2) Menus
Previous
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This displays the data of a group when that group No.
of tool life management data is set and the
Group
No.
key is pressed. The group No. can be referred to in the
group list.
This copies one line of data at the cursor position.
Line
copy
This writes, in the line where the cursor is at, the
contents (one line amount) of the copied data.
If the copied line of data is changed after the menu key
Line
is pressed, the data before changing is
Line copy
paste
written when pasted.
Once copied, a line of data can be pasted any number
of times until a new area is copied.
This erases a designated line (multiple lines possible)
of tool life management data.
Designation method: Compensation No. where
erasing begins/Compensation No. where erasing
finishes
Line
clear
(Ex.) 1/E : All compensation data is set to " " (blank).
When the
INPUT
a line, only the line where the cursor is currently at is
erased. After erasing, the subsequent lines are carried
and displayed.
This changes a group No.
When a group No. is set and the
Grp No.
change
pressed, the new number is validated, and the number
display changes.
An error occurs if a preexisting group No. is set.
This scrolls the display of the tool life management
Horiz
scroll
data to the left and right.
The group data for the previous group number will
group
display.
The group data for the next group number will display.
Next
group
This changes the screen to the screen that explains
Help
the ST and method setting details.
This displays the list of tool life data groups.
Group
list
search engine
3. Setup Screens
Details
INPUT
key is pressed without designating
key is
INPUT
I – 182
Type Reference
3.6.1 (3)
Designating a
A
group No.
3.6.1 (6)
C
Copying/pasting
the tool life data
B
3.6.1 (7) Erasing
one line of tool
life management
data
(8) Designating
A
and erasing a line
3.6.1 (4)
Changing a
group No.
A
–
C
–
C
–
C
3.6.3 Displaying
C
the Help screen
3.6.2 Displaying
C
the group list