5.16 Copying And Verifying Parameters Using A Usb Memory - Mitsubishi Electric FR-F800 Series Instruction Manual

5.16
Copying and verifying parameters using a USB
memory
• Inverter parameter settings can be copied to a USB memory device.
• Parameter setting data stored in a USB memory device can be copied to another inverter or verified to see if they differ
from the parameter settings of another inverter.
• Parameter settings can also be imported to a personal computer and edited in FR Configurator2.
 Changes in the USB memory copy operation states
• Insert the USB memory device into the inverter. The USB memory mode is displayed and the USB memory operations are
enabled.
Monitor mode
USB memory mode
Parameter setting
file number saved in
the USB memory
device
(up to 99)
582
5. PARAMETERS

5.16 Copying and verifying parameters using a USB memory

Downloaded from ManualsNet.com
Parameter setting mode
search engine
Function mode Fault history mode
Overwrite the inverter parameter setting onto the
designated file in the USB memory device.
Copy the parameter setting
from the inverter to the USB
memory device.
Write the designated
parameter setting file of
the USB memory device
to a parameter file of the
inverter.
Verify the designated
parameter setting file of
the USB memory device
against the parameter file
of the inverter.