Mitsubishi Electric FR-F800 Series Instruction Manual page 244

 Operation mode switching method
When "0, 1, or 2" is set in Pr. 340
Switching through the network
Switch to External
operation mode through
the network.
Network operation
When "10 or 12" is set in Pr. 340
Network operation
NOTE
• For details on switching by external terminals, refer to the following pages.
PU operation external interlock (X12
PU/External operation switchover (X16
PU/NET operation switchover (X65 signal), External/NET operation switchover (X66
Pr.340 Communication startup mode
Downloaded from ManualsNet.com
Switch to the Network operation
mode through the network.
Press
Press
search engine
External operation
Press on
the PU to light
on the PU to light
on the PU to light
signal)page 247
signal)page 248
selectionpage 250
5.6 (D) Operation command and frequency command
Switching with the PU
Press on
the PU to light
PU operation
PU operation
signal)page 248
5. PARAMETERS
1
2
3
4
5
6
7
8
9
10
243