Mitsubishi Electric FR-F800 Series Instruction Manual page 550
Hide thumbs
Also See for FR-F800 Series:
- Instruction manual (615 pages) ,
- Sample screen manual (83 pages) ,
- Hardware instruction manual (149 pages)
Advertisement
NOTE
• If the automatic recognition cannot be performed, initial setting in Pr.999 is required.
• For connecting the inverter to the GOT2000 series using the RS-485 terminal block, set Pr.549 Protocol selection = "0 (initial
value) or 1".
• For connection to a device other than the GOT2000 series, initial setting in Pr.999 is required.
• For details, refer to the GOT2000 Series Connection Manual (Mitsubishi Product).
Parameters referred to
Pr.999 Automatic parameter
5.12.10 Backup/restore
The GOT can be used for backing up inverter parameters and the data used in the PLC function of inverter.
The backup data stored in the GOT can be used to restore the data in the inverter.
Pr.
434
Network number (CC-Link
*1
IE)
N110
435
Station number (CC-Link IE) 0
*1
N111
*1
The setting is available in the inverter on which the FR-A8NCE is installed.
GOT2000
Connected devices
• To enable backup/restore, connect the inverter with the FR-A8NCE to a programmable controller (master station) via the
CC-Link IE Field Network.
NOTE
• The backup/restore function is enabled only when the inverter is connected to a master station programmable controller.
• For details on the connected devices, refer to the GOT2000 Series User's Manual (Monitor).
Data to be backed up and restored
• The following data can be backed up and restored. The data other than those listed in the following table cannot be backed
up or restored.
Inverter parameters
Parameters used for activating the PLC function
Programs (including SFCs) used in the PLC function
Global device comment information used in the PLC function
Function block source information
Downloaded from
ManualsNet.com
settingpage 211
Initial
Name
value
0
Ethernet
Restore
MELSEC iQ-R
Item
search engine
Setting range
0 to 255
Enter the network number of the inverter.
0 to 255
Enter the station number of the inverter.
CC-Link IE Field Network
Backup
FR-F800 (with the FR-A8NCE installed)
Description
5. PARAMETERS
5.12 (N) Communication operation parameters
1
2
3
4
5
6
7
8
9
10
549
Advertisement
Chapters
