CAUTION
• When Pr.502 = "3" and a communication line error occurs, or Pr.502 = "4" and a communication line error or a
communication option fault occurs, the operation continues. When setting "3 or 4" in Pr.502, provide a safety stop
countermeasure other than via communication. For example, input a signal through an external terminal (RES, MRS,
etc.) or press the PU stop on the operation panel.
Parameters referred to
Pr.7 Acceleration time, Pr.8 Deceleration
Pr.335 RS-485 communication retry
Pr.336 RS-485 communication check time
Pr.539 MODBUS RTU communication check time
Pr.550 NET mode operation command source
Pr.551 PU mode operation command source
504
5. PARAMETERS
5.12 (N) Communication operation parameters
Downloaded from
ManualsNet.com
timepage 228
countpage 505
intervalpage 505
intervalpage 520
selectionpage 251
selectionpage 251
search engine