Mitsubishi Electric FR-F800 Series Instruction Manual page 691

• FR-A8NF
Inverter status monitor
Bit Name
READY
14
signal
• FR-A8NL
Inverter output signal (network output SNVT_state nvoInvOutputSig)
Signal
Bit
name
15 Ready signal
*1 The value in the bit turns to 1 when power is supplied to the control circuit only.
690
9. APPENDIX
9.7 Ready bit status selection (Pr.349, N240)
Downloaded from ManualsNet.com
Pr.349 = "0, 1"
N240 = "0"
Reset cancel
Pr.349 = "100, 101"
N240 = "1"
The value in the bit turns to 1 when the inverter is ready for operation after
Pr.349 = "0, 1"
N240 = "0"
power-ON.
Pr.349 = "100, 101"
The value in the bit turns to 1 when the RY signal turns ON.
N240 = "1"
search engine
Description
0: During an inverter reset / during startup after power-ON.
1: During normal operation
0: RY signal is OFF
1: RY signal is ON
Description
*1