Mitsubishi Electric FR-F800 Series Instruction Manual page 367

 Adjustment method for the stall prevention operation level setting
voltage (current) bias and gain
(a) Adjustment by applying voltage (current) between terminals 1 and 5 (4 and 5) to set the voltage (current) at the bias/gain
level
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Changing the operation mode
Press to choose the PU operation mode. [PU] indicator turns ON.
Calibration is also possible in the External operation mode.
3.
Selecting the parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
4.
Calibration parameter selection
Turn until "
5.
Selecting a parameter
Turn until "
(Pr.933)Terminal 4 gain (torque)) for terminal 4.
6.
Analog voltage (current) display
Press to display the analog voltage (current) % currently applied to the terminal 1 (4).
Do not touch
7.
Voltage (current) application
Apply a 5 V (20 mA). (Turn the external potentiometer connected between terminals 1 and 5 (terminals 4 and 5) to a desired
position.)
8.
Setting completed
Press
alternately.
Turn
Press
Press
366
5. PARAMETERS
5.9 (T) Multi-function input terminal parameters
Downloaded from ManualsNet.com
" appears. Press
" (C19 (Pr.920) Terminal 1 gain (torque)) appears for terminal 1, or "
until calibration is completed.
to confirm the selection. The analog voltage (current) % and "
to read another parameter.
to return to the "
twice to show the next parameter.
search engine
to display " ".
" display.
" (C41
( )" are displayed