Table of Contents
Advertisement
Calling up the Desired Functions from the Home Display
From all the functions shown on the Menu display, you can pick out an often used one and register it to a
shortcut. Registered shortcuts are shown in the Menu area (page 27) at the bottom of the Home display,
allowing you to quickly call up the desired function from the Home display.
Replacing a Shortcut on the Home Display
Although seven shortcuts are registered by default, you can customize them as necessary.
1
Touch and hold the icon of the desired function until the color of the shortcut area
(bottom of the display) changes.
NOTE
To cancel this operation, touch any blank location on the display before going on to step 2.
2
From the seven locations at the bottom of the display, touch the one you want to
replace.
The function selected in step 1 will be registered, replacing the one selected here.
Moving a Shortcut
1
Touch and hold the desired icon until the color changes.
NOTE
To cancel this operation, touch any blank location on the display before going on to step 2.
2
From the seven locations, touch the desired destination icon.
The icons touched in steps 1 and 2 are switched.
1
2
2
1
CVP-709/CVP-705 Owner's Manual
31
Advertisement
Table of Contents
