Having Incoming Messages Printed On Paper From The Bypass Tray - Ricoh 3800C Operating Instructions Manual

Note
The action that follows pressing [Exit] varies
depending on the status of the machine when
the message occurred.
• If any received documents or reports were
being printed automatically, the printer au-
tomatically continues printing from where it
had left off.
• If any documents or reports were being
printed manually, the printer does not
resume the printing. Perform the opera-
tions from the beginning again.
You can turn this function on or off with the
⇒ p.216 "Changing the
User Parameters.
User Parameters" (Switch05, Bit5)
Operating InstructionsFacsimile Reference (option) <Advanced Features>
Having Incoming Messages Printed
on Paper from the Bypass Tray
You can have messages sent from Specified
Senders printed on paper from the bypass tray.
This is useful if you need messages printed on a
size of paper not stocked in the paper cassette(s).
You can set up to a maximum of 100 standard pa-
per in the bypass tray.
Limitation
The print area is determined by optional Ex-
pansion Memory, Resolution, and the vertical
length of originals.
You cannot output the received paper into the
optional Finisher Unit, when using this func-
tion. The paper will be delivered into the ma-
chine's paper tray, even when the optional
Finisher Unit has been set as the output
tray.⇒"General Features -- Output : Facsimi-
le" in Administrator Reference Copier System
Edition
150