Final Drive - Differential; Replacing The Flange Shaft Gasket Rings (Gearbox Assembled); Removing - Skoda Fabia II 2007 Workshop Manual

39 –

Final drive - differential

1 Replacing the flange shaft gasket
rings (gearbox assembled)

Removing

⇒ page 151
Installing ⇒ page 152 .
Special tools and workshop equipment required
♦ Inertia extractor - MP9-501-
♦ Gasket ring extractor - MP3-419/37-
♦ Thrust piece - T10082-
♦ Drive bushing - MP3-489 (3158)-
♦ Sealing grease - G052 128 A1-
1.1 Removing
For left gasket ring
– Fit the left front wheel ⇒ Chassis; Rep. gr. 44 .
– Turn steering to full left lock and raise the vehicle.
– If present, remove the sound dampening system ⇒ Body work;
Rep. gr. 50 .
– Remove the wheelhouse liner from the left wheelhouse ⇒
Body Work; Rep. gr. 66 .
– Remove drive shaft from flange shaft ⇒ Chassis; Rep. gr. 40 .
– Release the nuts -arrows- for the left steering joint ⇒ Chassis;
Rep. gr. 40 (on certain vehicles release the screws, see fig.
S39-0142).
– Release screws -1-.
– Unbolt coupling rod -2- -arrow-.
For right gasket ring
– Turn steering to full right lock.
– If present, remove the sound dampening system ⇒ Body work;
Rep. gr. 50 .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
.
Gearbox 02T - Edition 05.2014

1. Replacing the flange shaft gasket rings (gearbox assembled)

151