Tightening Torques - Skoda Octavia Workshop Manual

10
------------ 10-14 ------------
Removing and Installing Engine
Note:
Only re-use drained coolant if cylinder block, cyl-
inder head, cylinder head gasket, radiator, or
heat exchanger have not been replaced.
- Pour in coolant ⇒ page 19-3.
- Inspect engine oil level before starting en-
gine ⇒ Inspection and Maintenance.
- Electrical connections and routing:
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations.
- Adjust throttle cable ⇒ page 20-13.
Note:
If the battery earth strap is disconnected and
re-connected, additional operations have to be
performed
⇒ Electrical System; Repair Group 27.

Tightening torques

Notes:
♦ Tightening torques apply only to nuts and
bolts which have been lightly greased, oiled,
phosphatized or blackened.
♦ Additional lubricants such as engine or gear
oil, are permissible, but not Molykote.
♦ Do not use degreased parts.
♦ Tolerance of tightening torques ± 15 %.
Component
Nuts/bolts
In variation of this:
Driven plate to torque converter
Engine mounts, gearbox mounts,
pendulum support
Bolts connecting engine to gearbox
⇒ 5-Speed Manual Gearbox 02J; Repair Group 34
⇒ Automatic Gearbox; Repair Group 37
OCTAVIA
Nm
M6 9
M7 13
M8 20
M10 40
M12 70
60
⇒ page
10-16
Edition 02.02
S00.5104.55.20