ABB IRB 920 Product Manual page 896

5 Repair
5.8.1 Replacing the axis-1 gear unit sub-assembly
Continued
Reconnecting the air hoses, CP/CS cabling and Ethernet cabling (if equipped)
1
2
Continues on next page
896
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free. See Cut the paint or surface on the robot
before replacing parts on page 118
Note
After all repair work, wipe the Clean Room robot
free from particles with spirit on a lint free cloth.
Route the air hoses on the process hub behind
the bracket.
CAUTION
Correct cable routing is highly important.
If the cables are routed and secured incorrectly
the cables can be damaged.
© Copyright 2022 ABB. All rights reserved.
Note
Product manual - IRB 920
3HAC075721-001 Revision: C