MPM-1000A Operator Manual
8.7
NCW Network Page Tabs
The tabs displayed on the Network page provide you access to network statistics that
can be used to help troubleshoot network communication problems. You can access the
Network page by selecting Configure → Network, or the Network button.
8.7.1 NCW Network Tab
This is the primary Network screen for operating in NCW mode. To send or view
operator to operator messages, select the Message tab.
To view statistics, select one of the statistics tabs.
The HCI will not allow changing the Satellite when the Terminal status is Connected.
Refer to Table 8-1 NCW (Network Tab) for data descriptions for this window.
A popup menu will appear when
you right-click the mouse within
the Protocol Status field.
NOTE
Figure 8-5 NCW Screen Network Tab
8-11
1000-7075 Rev E