Table of Contents
Advertisement
MPM-1000A Operator Manual
11 SCPC NETWORK OPERATIONS
This is the Network screen when in the SCPC mode of operation. The controls in the TX
Power box are immediate action controls. The HCI highlights all other controls that you
can change. These new values take effect when you select Apply.
11.1 Selecting MIL-STD-188-165A (SCPC) Mode
a. Select Configure → Mode from the pull-down menu to launch the Select Mode
screen. (See Figure 11-1)
b. Select MIL-STD-188-165A Waveform. (See Figure 11-2)
c. Select OK. The Modem changes mode. Once the Modem has initialized the new
mode, the system will be in the SCPC mode.
Figure 11-1 Configure Menu
Figure 11-2 Select Mode Screen
11-1
1000-7075 Rev E
Advertisement
Table of Contents
Troubleshooting
