Bandwidth Segments List; Figure 6-7 Bandwidth Segments; Table 6-5 Edit Beam Dialog - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
Control/Indicator/Function
ID
Uplink and Downlink
Polarity
Uplink and Downlink Band
Uplink Center Frequency
(kHz)
Downlink Center Frequency
(kHz)
Bandwidth (MHz)
G/T
CROW Slots
Spreading
Most Disadvantaged
Network Terminal in this
beam.
G/T
EIRP
Contour Offsets
EIRP
G/T
SFD

6.3.4 Bandwidth Segments List

You use this dialog to select a bandwidth segment to edit, or to add a bandwidth
segment to this network. (See Figure 6-7)
Refer to Table 6-6 Bandwidth Segments for data descriptions for this window.

Table 6-5 Edit Beam Dialog

Six-character beam ID. (ex NCA6)
Receive and Transmit Polarity of the beam.
Frequency band of the uplink and the downlink. (Ka, Ku, C, or X)
Center frequency of the uplink signal.
Center frequency of the downlink signal.
Bandwidth of the beam.
Total G/T for the beam.
Number of contention return Orderwire (CROW) slots to be scheduled in this
beam.
Spread factor to use for the CROWs in this beam.
EIRP and G/T of the most disadvantaged terminal expected to be
participating as a network member in this beam.
G/T of the most disadvantaged terminal in this beam.
EIRP of the most disadvantaged terminal in this beam.
Based on the physical location of the terminal.
See above.
See above.

Figure 6-7 Bandwidth Segments

6-7
Description
1000-7075 Rev D