Ncw Advanced Tab; Figure 8-16 Ncw Setup Advanced Tab; Table 8-12 Ncw Setup Advanced Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

8.8.2 NCW Advanced Tab

This page allows fine-tuning on how the network scheduler reacts to changes in the
network.
Refer to Table 8-12 NCW Setup Advanced Tab for data descriptions for this window.
Control/Indicator/Function
Terminal
Assigned ROW Max
Retransmissions
Contention ROW Max
Retransmissions
RTD Filter Weight
FOW RX Freq Error
Recursive Filter Wt
Forwarding Table Age Limit
(sec)
Received Frame Fragment
Age limit (sec)
Received Fragment Discard
Policy
Controller
Minimum Contention Slots
Frame

Figure 8-16 NCW Setup Advanced Tab

Table 8-12 NCW Setup Advanced Tab

The number of retransmissions of an AROW message after which the
AROW message transmission protocol is terminated.
The number of retransmissions of a CROW message after which the
CROW message transmission protocol is terminated.
The weight for the recursive filtering of the Satellite round-trip-delay value
at the Terminal.
The averaging filter weight for the recursive filtering of the RFOW receive
frequency error.
Maximum time that information about a particular route will be kept in the
forwarding table.
The age in seconds after which incomplete received Ethernet packet
fragments are discarded.
Discard policy applied for received fragments.
The minimum number of CROW slots allocated in each network frame.
(Obsolete. This is now entered on a per beam basis. See section 6.3.4)
8-30
Description
1000-7075 Rev E