MPM-1000A Operator Manual
2) Select Maintenance and then click OK. (See Figure 4-10)
3) Wait until the Modem has completed initializing Maintenance Mode (a pop-up
screen will say "Terminal Initializing...) Wait to proceed with step 4.
4) From the Menu bar, select Software → Download + Rollover to display the
Software Download window. (See Figure 4-11)
5) On the Software Download screen, click the File button and browse to the
new version that was placed on the C: drive in step a. (See Figure 4-12)
The software download screen shown is when the Modem is in a
multiple Modem configuration. For more information on multiple
modem configuration, refer to Section 6.4.
Figure 4-10 Select Mode Screen
Figure 4-11 Software Menu
NOTE
4-9
1000-7075 Rev E