Ncw Bw/Eirp Tab; Figure 8-8 Ncw Bw/Eirp Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual 1000-7075 Rev E

8.7.4 NCW BW/EIRP Tab

This NC only page provides Satellite BW and EIRP statistics for the network. This
shows you the average amount of the Satellite resources being used and the peak
usage since the last reset.
NOTE
This Tab is only available when the system is connected to the Satellite.
Refer to Table 8-4 NCW BW/EIRP Tab for data descriptions for this window.

Figure 8-8 NCW BW/EIRP Tab

The Reset button on this and the following statistics screens commands the Modem to
reset the statistics on the screen to zero. The HCI updates this screen once per second
by polling the Modem information. The Modem updates the information in the Modem
every 400 ms (that is, every frame), so the values stay reset for only a short time.
The Pause button on this and the following statistics pages tells the HCI to stop polling
for updates. The Modem continues to update its information.
8-17