Network Member Operations; Setting The Terminal For Ncw Mode As A Network Member; Figure 9-1 Configure Menu Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

9 NETWORK MEMBER OPERATIONS

This section covers the setup of the Modem to operate as a NM.
9.1

Setting the Terminal for NCW Mode as a Network Member

a. Select Configure → Network Centric Waveform Setup. (See Figure 9-1)
1) When the NCW Parameters Screen opens, enter a Node Name that the
Network Administrator has assigned to your node. (See Figure 9-2)

Figure 9-1 Configure Menu Tab

9-1
1000-7075 Rev E