Nominal Value Method; Figure 6-37 Configure Menu; Figure 6-38 Nominal Entry - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

6.5.3 Nominal Value Method

a. Select Configure → Terminal Calibration. (See Figure 6-37)
b. Check the box Terminal Calibration State ON. (See Figure 6-38)
c. Select on Nominal Entry Tab under the PA Gain and Antenna Gain field of the
Terminal Calibration.
d. Enter in measured gains.

Figure 6-37 Configure Menu

Figure 6-38 Nominal Entry

6-29
1000-7075 Rev D