Maintenance; Hci Software Update; Figure 14-1 Remove Ipmodemhci - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

14 MAINTENANCE

This section covers the basic authorized maintenance of the system. If a software
update is recommended or necessary, contact L-3 Communications-Linkabit Group
customer service using the contact information at the front of this manual. The Product
Manager will authorize access to a secure website where software updates and
accompanying documentation may be downloaded.

14.1 HCI Software Update

When a newer version of the HCI is released, you must perform the following steps to
update the HCI on the PC.
a. If HCI is running, Exit the HCI.
b. Uninstall the current HCI.
1) In the Windows Start menu, select Control Panel → Add/Remove
Programs.
2) In the Programs list, select Modem HCI → Remove. (See Figure 14-1)
c. Follow the on-screen instructions until complete. Once removed, the
IPModemHCI program will no longer be visible on the current Installed Programs
list.
d. Install the new software update as per procedure for Software Installation in
Section 4 of this manual.

Figure 14-1 Remove IPModemHCI

14-1
1000-7075 Rev E