Adding To The Pim Stateless Group List; Figure 10-5 Add To Multicast Group Dialog Box; Table 10-5 Pim Stateless Group - L3 Communications MPM-1000A Operator's Manual

Ruggedized ip modem

Table of Contents

MPM-1000A Operator Manual

10.6 Adding to the PIM Stateless Group List

The PIM Stateless Group list allows you to specific Ethernet multicast MAC addresses

that are disallowed from establishing NCW multicast group addresses. Enter an

Ethernet MAC address in the following format: six 2-digit hexadecimal numbers

separated by „-„. The addition will be finalized and the table updated upon selection of

the Accept button. Entries may be changed or removed from the table by selecting the

line to be removed. This will generate the edit pop-up, which will have a Delete option,

and allow you to modify the Ethernet address. The change will be finalized and the table

updated upon selection of the Accept button.

Refer to Table 10-5 PIM Stateless Group for data descriptions for this window.

Control/Indicator/

Function

PIM Stateless Group

Description

Entries may be added to the table by selecting the next empty line. This

will generate the add pop-up in which the operator can enter an Ethernet

MAC address in the following format: six 2-digit hexadecimal numbers

separated by „-„. The addition will be finalized and the table updated upon

selection of the Accept button. Entries may be removed from the table by

selecting the line to be removed. This will generate the edit pop-up, which

is the add pop-up with an additional button: Delete. The entry will be

removed and the table updated upon selection of the Delete button.

Entries may be edited by selecting the line to edit. This will generate edit

pop-up. The operator can then change the Ethernet MAC address. The

change will be finalized and the table updated upon selection of the

Accept button.

10-8

1000-7075 Rev E

Table of Contents