Ncw Setup Tabs; Ncw Parameters Tab; Figure 9-10 Ncw Parameters Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual 1000-7075 Rev E
9.3

NCW Setup Tabs

The tab displayed in the NCW Setup screen allows you to view settings. Generally,
these fields are set to defaults and should not be changed. To view this page
(Configure → NCW → Parameters).

9.3.1 NCW Parameters Tab

This page contains information required by the NCW scheduler to compute burst rate
and power. The Secure Voice Channel information is only available when the selected
mode is Network Centric Waveform with SOW. Changes take effect after clicking on the
Apply button.
Refer to Table 9-8 NCW Parameters Tab for data descriptions for this window.

Figure 9-10 NCW Parameters Tab

9-15