Table 9-4 Ncw Rx Burst Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
Control/Indicator/Function
Reference FOW
Source Name
FOW ACQs
FOW CRCs
FOW SNR (dB-Hz)
AROWs and DCOMs
Source Name
AROW ACQs
AROW CRCs
DCOM ACQs
DCOM CRCs
FOW Thresholds
FOW Acq %
FOW CRC %
FOW SNR
AROW/DCOM Thresholds
AROW Acq %
AROW CRC %
DCOM Acq %
DCOM CRC %

Table 9-4 NCW RX Burst Tab

Name of the Network Control Terminal transmitting these bursts.
This is a count (since the last reset) of the number of missed FOW bursts
along with the number of expected FOW bursts.
This is a count (since the last reset) of the number of FOW bursts with
CRC errors along with the number of expected FOW bursts less the
number of missed FOW bursts.
This is the current measured SNR of the FOW burst.
Name of the Terminal transmitting these bursts.
This is a count (since the last reset) of the number of missed AROW bursts
along with the total number of attempted AROW acquisitions. Note that a
Terminal that is "network member only" is not required to successfully
receive all AROW bursts; therefore, AROW Acquisition Statistics are not
displayed for "network member only" Terminals.
This is a count (since the last reset) of the number of AROW bursts with
CRC errors along with the total number of AROW CRC validations. Note
that a Terminal that is "network member only" is not required to
successfully receive all AROW bursts; therefore, AROW CRC Statistics
are not displayed for "network member only" Terminals.
This is a count (since the last reset) of the number of missed DCOM bursts
along with the number of expected DCOM bursts. Note that Terminals do
not receive their own DCOM bursts but may receive their own AROW
bursts.
This is a count (since the last reset) of the number of DCOM bursts with
CRC errors along with the number of expected DCOM bursts.
These are operator defined thresholds determine when the HCI changes
the background color of the Acq field. Yellow is the warning level, Red is
the critical level. The number entered is the percentage of bursts missed.
These are operator defined thresholds determine when the HCI changes
the background color of the CRC field. Yellow is the warning level, Red is
the critical level. The number entered is the percentage of bursts in error.
These are operator defined thresholds determine when the HCI changes
the background color of the SNR field. Yellow is the warning level for low
SNR, Red is the critical level for very low SNR. The number entered is the
SNR in dB-Hz.
These are operator defined thresholds determine when the HCI changes
the background color of this field. Yellow is the warning level, Red is the
critical level. The number entered is the percentage of bursts missed.
Same as previous.
Same as previous.
Same as previous.
9-10
Description
1000-7075 Rev E