System Configuration; Configure System Screen; Figure 6-1 Configure Menu - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

6 SYSTEM CONFIGURATION

This section covers the configuration of the system.
6.1

Configure System Screen

This page controls Terminal specific parameters that are set on the initial installation.
Once set, these parameters generally do not change.
a. Select Configure → System, the Configure System screen will appear. (See
Figure 6-1)
Refer to Table 6-1 Configure System Configuration Screen for data descriptions for this
window.

Figure 6-1 Configure Menu

6-1
1000-7075 Rev D