MPM-1000A Operator Manual
8.7.9 NCW TX Queue Tab
This page provides transmit queue depth statistics by network Terminal and by DiffServ
Code Point. The HCI displays the queue depths in bytes and it refreshes the display
once per second (unless Paused).
Refer to Table 8-9 NCW TX Queue Tab for data descriptions for this window.
Control/Indicator/Function
Destination Based Queue Depths
Destination Name
TX Queue Depth
DSCodePoint Based Queue Depths
DiffServ CodePoint
Name
Priority
TX Queue Depth
Clear All Transmit Queues
Figure 8-13 NCW TX Queue Tab
Table 8-9 NCW TX Queue Tab
Name of the Terminal receiving these bytes.
Number of bytes in the queue for this destination.
DiffServ code point number.
DiffServ code point name.
SATCOM priority for this DiffServ code point.
Number of bytes in the queue for this code point.
This button commands the Modem to discard all data queued for
transmission. This should only be used when trying to solve a
network problem where the Modem appears to not be transmitting,
or when the terminal user has accidently queued up an extra large
amount of data. This is similar to deleting all entries in a printer
queue. All queued data is lost.
8-26
Description
1000-7075 Rev E