Save/Save As Configuration; Figure 5-12 Save Configuration; Table 5-1 File Configuration; Table 5-2 Save Configuration - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual
Item
Save Config
Save Config As
Restore Config
Exit
5.7

Save/Save As Configuration

The Save Configuration dialog appears when you request to save a configuration file for
the Modem.
Refer to Table 5-2 Save Configuration for data descriptions for this window.
a. Type in a description in the Description Field.
b. Select the items that you wish to save in this configuration in the Save Options
field.
c. Select Save. Once Save has been selected a Save As (See Figure 5-13) screen
will appear.
d. Name the configuration file and select Save.
Control/Indicator/Function
Description
Save Options
Node Name
Terminal Location

Table 5-1 File Configuration

Saves the active configuration using the same configuration description and
file name.
Saves the active configuration using a new configuration description and file
name. The Save Configuration dialog will be displayed to allow you to enter a
new description and options.
Restores the Modem to a previous configuration. You select a saved
configuration file (*.xml file). A Restore Configuration dialog will be displayed to
allow you to select specific options and Modem mode after restoring the
configuration.
Exits the HCI application. Note: Exit stops the HCI application only, the MPM-
1000 Modem will continue to run.

Figure 5-12 Save Configuration

Table 5-2 Save Configuration

Accepts up to 255 characters for description of the Modem configuration.
Current NCW name (Node Name) for the Terminal that will be saved if
selected.
Current Latitude/Longitude of the Terminal will be saved if selected.
Functions
Description
5-7
1000-7075 Rev E