Ncw Qos Tab; Figure 9-12 Ncw Qos Tab; Table 9-10 Ncw Qos Tab - L3 Communications MPM-1000A Operator's Manual

MPM-1000A Operator Manual

9.3.3 NCW QOS Tab

This screen allows customizing the mapping between the type of service (TOS) field on
IP packets and the priority they will have on the NCW controlled satellite network.
Refer to Table 9-10 NCW QOS Tab for data descriptions for this window.
Control/Indicator/Function
DS/ToSToS
Traffic Type
Delay Sensitive
Priority
Aging
MS
Assured Delivery
Retransmit Max
Move Up
Move Down
Add
Edit
Delete

Figure 9-12 NCW QOS Tab

Table 9-10 NCW QOS Tab

DiffServ CodePoint (first 6 bits of IP Type of Service field).
Label for the traffic type associated with the DiffServ CodePoint.
Yes/No selection indicating whether the service is delay sensitive.
Note: Delay Sensitive CodePoint should only be used for streaming data
services.
SATCOM priority associated with the DiffServ CodePoint (0=highest;
15=lowest).
Yes/No selection indicating if packets are to be dropped due to age.
If aging is enabled, time in milliseconds (ms) until packets are discarded.
Yes/No selection for packet acknowledgement/retransmission protocol.
The number of times an un-acknowledged packet is to be retransmitted (if
assured delivery is enabled).
Moves the highlighted entry higher in its priority group.
Moves the highlighted entry lower in its priority group.
Adds a new entry.
Allows you to edit the DS/TOS that is highlighted.
Deletes the currently highlighted entry.
9-18
Description
1000-7075 Rev E