MPM-1000A Operator Manual
Control/Indicator/Function
Antenna Beamwidth Power Spectral Density Settings
Beamwidth (deg)
PSD (dBW/Hz)
Regulatory PSD Limits
ITU Offset from FCC (dB)
Downlink PSD Limit
(dBw/4kHz)
Apply Button
Add Button
Delete Button
Edit Button
Default Button
Figure 8-20 Antenna Beamwidth vs. Power Spectral Density
Table 8-14 NCW PSD Tab
Antenna Beamwidth in degrees. Values between 0.00 and 10.00 can
be entered.
Power Spectral Density entry in dBW/Hz. Values between -50.00 and
0.00 can be entered.
Select Regulatory PSD Limit.
Set the offset from the FCC PSD limit. This is applied for
I nt ernational Tel ecommunication Uni on (ITU) Operations.
This sets the PSD limit of the downlink.
This will apply changes made to the Regulatory PSD, ITU Offset and
Downlink PSD Limit.
Add new data to the Antenna Beamwidth PSD table.
Delete data from the Antenna Beamwidth PSD table.
Edit a data entry in the Antenna Beamwidth PSD table.
Sets the data entries in the Antenna Beamwidth PSD table to those
mandated by the US Federal Communications Commission (FCC).
8-35
Description
1000-7075 Rev E