MPM-1000A Operator Manual
Control/Indicator/Function
Edit button
Delete button
6.3.3 Beam Edit Dialog
You use this dialog to edit the selected satellite beams. (See Figure 6-6)
Refer to Table 6-5 Edit Beam Dialog for data descriptions for this window.
Note: Uplink center frequency, downlink center frequency and bandwidth are used to
validate bandwidth segment entries on the bandwidth segment entry dialog.
Figure 6-5 Beams List Screen
Table 6-4 Beams List
Allows the selected beam‟s parameters to be modified
and brings up the Beam Edit dialog.
Deletes the selected beam.
Figure 6-6 Edit Beam Dialog
6-6
1000-7075 Rev D
Description